Monday, 7 May 2012

How to Enter Unlock Codes on most Blackberry models (Instructions)

Factory Unlock Code for Any BlackBerry phone



Read This First

* With the provided Unlock codes, if you are receivng "Code Error",  DO NOT WORRY!  proceed to the end of the page to the "Trouble Shooting" section on how to proceed.

* DO NOT use all of the attempts to enter the Unlock code otherwise your phone will be Hardlocked (MEP 0),  Contact us First  if you have less than 5 tries left to enter the Unlock Code.

* Video proof will be required if code does not work, it's a good idea to film it so we can help trouble shoot what the problem is. We may also offer you a discount off your original purchase amount if you can provide us with a video of successfully unlocking your device.

There are Multiple Unlock Codes Above, which One is it?
.
If you only received 1 Unlock Code, Don't worry about this part, use the code provided above. Or if the Unlock Codes above contain the words "Preferred" OR  "Other Codes" try using those codes first.

* Unlock Code is Normally the NCK Code or MEP2 code
.
The MEP2 Code is the Second Set of Number! MEP4 is the Fourth Set of Numbers!
.
Example:

SIM Code ...: XXXXXXXXXXXXXXXX.......... MEP1
NCK Code ...:  XXXXXXXXXXXXXXXX .......... MEP2  <== Network Unlock Code (MEP2)
Subset Code :  XXXXXXXXXXXXXXXX .......... MEP3
Prov Code ..:  XXXXXXXXXXXXXXXX .......... MEP4   <== Service Provider Code (MEP4), if required only
Corp Code ..:  XXXXXXXXXXXXXXXX .......... MEP5

OR
.
..... SIM Code ...: XXXXXXXXXXXXXXXX.......... MEP1 NCK Code ...: XXXXXXXXXXXXXXXX.......... MEP2 Subset Code : XXXXXXXXXXXXXXXX.......... MEP3 Prov Code ..: XXXXXXXXXXXXXXXX.......... MEP4 Corp Code ..: XXXXXXXXXXXXXXXX.......... MEP5
.
* Some Blackberry phones need the  Prov Code or MEP4  (Service Provider) code, normally  Telus, Koodo, and Bell Blackberrys.



With a simcard in the phone
  1. Power on
  2. Go to settings
  3. Go to advanced options
  4. Go to sim card
  5. Type MEPD (if nothing go straight to step 6)
  6. Type MEP[Alt + 2] 
  7. It will ask you for the unlock code. Enter it and your phone is unlocked! 

How to unlock Blackberry Z10 / Z30 / Q10 / Q5 Unlocking Instructions:1. Insert a non accepted simcard and power phone on.
2. Go to Settings > Security and Privacy > Simcard
3. Press “Unlock Network”
4. Enter the 8 or 16 digit code

5. Phones is now Unlocked!

NOTE: Blackberry Rogers/Fido Canada Q10,Z10 phones use 8 digit unlock code, so enter only the first 8 digits of the 16 digits code.

Unlock Z10
Unlock Z30
Unlock Q10
Unlock Q5


How to Enter Unlock Codes on BlackBerry Torch
1) Go to options, device settings, advanced system settings, simcard
2) Type in MEPD using the keyboard (nothing will show on screen)
3) Type in MEP, hold ALT and press 2, another screen pops up for the code
4) Enter the code, remember you ONLY have 10 chances to get it right
5) Press the enter key


Unlock BlackBerry Torch 9800 
Unlock Blackberry Torch 9810 
Unlock Blackberry Torch 9850
Unlock Blackberry Torch 9860

How to Enter Unlock Codes on BlackBerry Storm
1) Need a SIM card inserted into the phone
2) Click on manage connections, select turn all connections off
3) Go to Settings Menu, Options, Advanced Options and then SIM Card.
4) Hit the menu button and select show keyboard
5) Type in mepd using the keyboard (nothing will show on screen)
6) Type in mep2 another screen pops up for the code
7) Enter the code, remember you ONLY have 10 chances to get it right
8) Press the enter key
9) A message will appear saying code accepted
10) Turn device off, insert SIM of your choice if have not done so already
11) Turn the phone back on
12) Go to Options, then Mobile Network, on the third row switch it to GSM/UMTS and you're done.

Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
2) Sometimes the phone requires you to do "m e p p d" instead of "m e p d" and if that occurs, you will need to do "m e p p 2" instead of "m e p 2"
3) If you have issues with the network not working after you have finished and the phone isn't low on power, switch from Global to GSM to Verizon a few times (keep on doing) and after 3 times of the process completed, leave it on GSM. Should work now.

Removing "Activation Required" on the screen:
1) On the main screen of the phone, press ##000000
2) For the Mobile Directory Number, put in your phone number in there.
3) After you have done that, press the menu button to save the options and the phone will automatically restart
 
VERIZON BlackBerry Storm
Unlock Instructions
Tip: Turn the phone sideways so you get the full qwerty keypad

1. Ensure the SIM Card thatcame pre-installed in the 9530 is inserted
2. Go to 'Manage Connections'
3. Click on 'Turn All Connections Off'
4. Go to 'Options'
5. Click on 'Status'
6. (Input required info into Guarded Link to retrieve the unlock code)
7. Go back to 'Options'
8. Click on 'Advanced Options'
9. Click on 'SIM Card'
10. Type 'MEPD' (letters will not appear on-screen but a menu will pop up)
11. Type 'MEP2' (user will be prompted to enter MEP code)
12. Enter the unlock code (for example '1234567890123456')
13. Reboot device
14. Go to 'Manage Connections'
15. Click on 'Restore Connections'
16. Device is now unlocked


Unlock Blackberry Storm 9530
  
How to Enter Unlock Codes on BlackBerry 8800 & 8820:
  1. You must have a SIM card in your phone to complete these steps (can be active or inactive)
    Go to settings menu => and then Options.
  2. Select Advanced options => and then Sim card
  3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
  4. Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
  5. You should be presented with a prompt "Enter Network MEP Code". Type in the 16 or 8 digit unlock code and press in the track wheel / jog dial to confirm
  6. Your phone is now unlocked
How to Enter Unlock Codes on BELL BlackBerry Bold 9000 and 9700:This procedure works best with the original SIM card in the phone (can be active or inactive). Make sure the phone is not displaying the low battery warning!
  1. Power on
  2. Go to settings
  3. Go to advanced options
  4. Go to sim card
  5. Type MEPD
  6. Type MEP[Alt + 2], enter NCK or Network code
  7. Type MEP[Alt + 4], enter SP or Service Provider code
  8. Phone is unlocked!
How to Enter Unlock Codes on BlackBerry Curve 8300, 8310, 8320, 8520, Bold 9000, 9700 and 9800 Torch:This procedure works best with the original SIM card in the phone (can be active or inactive). Make sure the phone is not displaying the low battery warning!
  1. Power on
  2. Go to settings
  3. Go to advanced options
  4. Go to sim card
  5. Type MEPD
  6. Type MEP[Alt + 2] 
  7. It will ask you for the unlock code. Enter it and your phone is unlocked!
How to Enter Unlock Codes on BELL BlackBerry 9800 Torch:
  1. Input non accepted simcard into the phone
  2. Enter 8 digit unlock code sent
How to Enter Unlock Codes on BlackBerry Pearl 9100:This procedure works best with the original SIM card in the phone (can be active or inactive). Make sure the phone is not displaying the low battery warning!
  1. Power on
  2. Go to settings
  3. Go to advanced options
  4. Go to sim card
  5. Type MEPPD
  6. Type MEPP[Alt + 2] 
  7. It will ask you for the unlock code. Enter it and your phone is unlocked!
How to Enter Unlock Codes on BlackBerry 8100, 8120, 8110 Pearl:
  
  1. Go to Options Menu => Advanced Options
  2. In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
  3. You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2 (*You won't see any text while you are typing either one of these.)
  4. Type in the 16 or 8 digit unlock code and your phone is unlocked!
or
  1. Insert SIM into device
  2. Power phone on and Turn off the radio (Turn Wireless Off option) VERY IMPORTANT.
  3. Select "Options" THEN SELECT ADVANCED OPTIONS
  4. Scroll down and select "SIM Card"
  5. Type "MEPPD" (please note that you will not see what you type on the screen)
  6. Type "MEPP then [ALT BUTTON] then "2" (please note that you will not see what you type on the screen)
  7. Enter the Unlock Code
  8. Press enter
  9. Reboot device. Device is now unlocked.
Unlock BlackBerry Pearl 8100
Unlock BlackBerry Pearl 8110
Unlock BlackBerry Pearl 8120

How to Enter Unlock Codes on BlackBerry 8700 and 8700c:

You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an AT&T or Cingular Sim card in the phone (can be active or inactive ). Make sure the phone is not displaying the low battery warning!
  1. Go to settings
  2. Go to options
  3. Go to advanced options
  4. Go to sim card
  5. Type MEPD (not case sensitive) (you will not see text appear on screen while typing)
  6. Does it say Network active? if so your phone is locked
  7. Hold the ALT Key while typing in MEPE (not case sensitive, and you will not see text appear on screen while typing)
  8. It will say "Enter Network MEP Code, Type in the 16 or 8 digit unlock code, press in the jog dial to confirm.
  9. Your phone is now unlocked
How to Enter Unlock Codes on BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc.:
  1. Select Options menu on BB.
  2. Now you select SIM CARD menu. To be able to see this you have to type this on the keypad on phone : (TEXT WILL NOT APPEAR ON THE SCREEN until you enter the unlock code)
  3. Type 'MEPD' for all models except 7100 in which case in case use 'MEPPD'.
  4. Usually you should see "active" NET lock. Now in order to disable this lock type 'MEP2' respectively 'MEPP2' if phone is 7100 and will appear a dialog asking for code. NOTE: You must use the "alt" or "shift" key to enable numbers so example would be: m-e-p-"alt key"-2.
  5. Now you should see the place to enter your net unlock code. (if not, you didn't type in mep2 or mepp2 properly.)
  6. Here you must enter the "NET Unlock Code" that the bb unlocker showed you and hit return.
How to Enter Unlock Codes on T-Mobile Blackberry 8100 Phones (alternative instructions if above instructions do not work):
  1. Can be done without a sim card inserted.
  2. While on the home screen, click the “blackberry key” on keyboard, then select “options”.
  3. Choose “Advanced Options”.
  4. Select “Sim Card”
  5. There is no area to type these letters; you just type them as instructed. No need to hit keys twice to get a letter either. Type m e p p d to display the first five levels of SIM locking. Most companies use network locking so the Network should display Active. All other states should display Disabled (you will not see text appear on screen while typing)
  6. Type m e p p 2 to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2) ( you will not see text appear on screen while typing )
  7. Input the SIM Unlock code
  8. Press in the trackball in once

How to Enter Unlock Codes on T-Mobile BlackBerry Phones:
  1. On the Home screen, click the Tools icon. The Options screen appears.
  2. In the tools screen, select the Settings icon.
  3. Scroll to SIM Card and select it. You should see the phone number and the SIM ID number.
  4. Type ‘mepd’ to display the first five levels of SIM locking.
  5. T-Mobile uses network locking so the Network should display Active. All other states should display Disabled. Please note: For the Blackberry 7100t you will hit the “P” twice when entering the ‘mepd’ and ‘mep2′ for steps 4 & 5.
  6. Type ‘mep2′ to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2)
  7. Input the Network Unlock code
  8. Press ENTER and reboot handheld.

How to Enter Unlock Codes on T-Mobile BlackBerry 8100 Phones (alternative instructions if above instructions do not work):
  1. Can be done without a sim card inserted.
  2. While on the home screen, click the “blackberry key” on keyboard, then select “options”.
  3. Choose “Advanced Options”.
  4. Select “Sim Card”
  5. There is no area to type these letters, you just type them as instructed. No need to hit keys twice to get a letter either. Type m e p p d to display the first five levels of SIM locking. Most companies use network locking so the Network should display Active. All other states should display Disabled (you will not see text appear on screen while typing)
  6. Type m e p p 2 to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2) ( you will not see text appear on screen while typing )
  7. Input the SIM Unlock code
  8. Press in the trackball in once
 Unlock your BlackBerry NOW!!


How to Enter Unlock Codes on BlackBerry Curve 9320


  1. From the menu go to Options > Device > Advanced System Settings > Sim Card
  2. From the "Sim card" screen press the button: M E P D 
  3. The screen that will be opened is the "SIM card Personalization Screen", you will see there are the SIM locks of your Blackberry.
    If the "Service provider" is active - hold the [ALT] key and type MEP4
    If the "Network" is active - hold the [ALT] key and type MEP2
  4. A request for the unlock code will be displayed, type the unlock code and press enter.  
  5. Your Blackberry will be restarted and unlocked.
Unlock BlackBerry Curve 9320